stain.StainImageDamp.mediaItem.Image.altText

Deep Down Dirt Removal

Deep down dirt in your carpet can be tricky. An example could be previous occupants of your new home that have not kept the carpets clean or just a build up of dirt over the years. No need to worry though, the range of Vanish carpet cleaners can help to clean your carpet leaving them 5 x cleaner versus vacuuming alone!

HOW TO GET DEEP DOWN DIRT OUT OF A CARPET OR RUG

To remove deep down dirt in a large area we recommend using Vanish Powerpowder or for really ground in dirt in high traffic areas such as hallways and stair cases, we recommend Vanish Powerfoam High Traffic Carpet Cleaner:

Solution 1 Solution 1
Solution 2 Solution 2
Solution 3 Solution 3
Vanish Powerpowder large area carpet cleaner

Ventilate the room well prior to use.

Vacuum the carpet before use.

Shake the Vanish container vigorously before each use to maximise product coverage.

Remove cap & treat an area of 0.8m squared at a time, sprinkle evenly on the carpet following the guidelines on the bottle. Do not add water.

Using a soft bristle brush, immediately brush the powder thoroughly into the carpet. Continue to the next section.

Wait at least 20 minutes for the powder to dry. Meanwhile replace cap tightly & fit a new vacuum bag or empty the machine. Now vacuum the whole carpet thoroughly.

Occasionally you may find light patches after cleaning. The powder can bind to stain residues; you can remove the residues with a soft brush and vacuum again.

Important:Always follow the usage instructions on the Vanish packaging. Do not use on wool, silk or leather. Do not use on finished or coated surfaces - for example wood, metals etc.

Vanish Powerfoam High Traffic

Shake the can well and spray from an 80cm height over the area which needs treating. Always spray the carpet cleaner downwards, never upwards.

Work the foam into the carpet using a clean, damp colourfast sponge-mop or cloth.

Leave for approximately 2 hours (or until dry) and then vacuum.

Important:Always follow the usage instructions on the Vanish packaging. Do not use on wool, silk or leather. Do not use on finished or coated surfaces - for example wood, metals etc.

Vanish Easy Clean

Use Vanish Easy Clean to clean high traffic areas in just three easy steps:

 

  1. Dispense: To loosen the ground in dirt and odours, pull the trigger and dispense the foam deep into the carpet.
  2. Brush: With the brush, work the foam into the carpet to lift the dirt and odours to the surface.
  3. Vacuum: Let the carpet dry and vacuum away.
 

For more tips, click the titles below:

expand
Dirt in Your Carpets: Did You Know?

Deep down soil, grease and grit can reduce the life of your carpet. When you walk on your carpet the deep down dirt and grit wears away at the fibres like sandpaper. Grains of dirt trapped deep in the fibres rub against the carpet and can lead to premature traffic lanes which make you carpet look worn and shabby. Having your carpets 'dry cleaned' generally concentrates on the top portion of the fibres, deeper down dirt and grit tends to remain behind. Vanish cleans the entire carpet, from the base of the fibres to the top.

Other Useful Stain Removal Tips

Vanish can help get stains out of clothes including grass stains, tea stains and make up stains.

Important:Always follow the usage instructions on the Vanish packaging. Do not use on velvet materials, brocrade or silk and oriental rugs.